BLOG

29

2023

-

05

PRECAUTIONS FOR INSTALLING RECESSED STRIP LIGHTS

Author:


Now in the purchase of home lighting, many people will choose recessed strip lights, because they are beautiful and stylish also save space. However, the installation of recessed lighting is a problem that should not be ignored, what matters need to be noted, what are the details of the problem, which is unknown to everyone. The following is an introduction to the installation of recessed strip lights what are the considerations.

Now in the purchase of home lighting, many people will choose recessed strip lights, because they are beautiful and stylish also save space. However, the installation of recessed lighting is a problem that should not be ignored, what matters need to be noted, what are the details of the problem, which is unknown to everyone. The following is an introduction to the installation of recessed strip lights what are the considerations.

1. Application range of recessed strip light

(1) recessed strip lights for home use. Household recessed ceiling is suitable for installation in the kitchen, bathroom, balcony, hallway.

(2) Recessed ceiling lights for engineering. Engineering is more suitable for button board ceiling, gypsum board ceiling and wood ceiling. Pre-open a good hole above the board, the light of the two steel card installed in the ends of the light, connected to the power cord, directly embedded can be.

2. Installation precautions of recessed strip light

(1) Embedded light bar can not be installed directly on combustible objects

Some families use three plywood lined with paint behind the ceiling lamp for aesthetic purposes, which is actually very dangerous and must be insulated; if the high-temperature parts of the lamp surface are close to combustible objects, insulation or heat dissipation measures should also be taken.

(2) Wrap the connection wire well

The two wires connected to the power inlet of the recessed strip light, electrical contact should be good, but also separately wrapped with black tape, and keep a certain distance, if possible, try not to put the two wires under the same piece of metal, to avoid short circuit, the danger.

(3) Embedded light bar should also be checked before installation

The cross-section of the wire core leading to each lamp, copper-core flexible wire is not less than 0.75mm2, otherwise the lead must be replaced. The connection between the lead and the lamp head, the connection of parallel wires between lamp heads should be firm, and the electrical contact should be good, so as to avoid the danger of sparking between the lead and the terminal due to poor contact.

(4) Safety

Educate children not to throw balloons and other things indoors to the LED recessed strip light, so as not to fall on the light hanging decorations hurt people or affect the decorative effect of the lamps.