BLOG

29

2023

-

05

WHAT IS LED STRIP TILE LAMP? WHAT ARE THE CHARACTERISTICS OF LED STRIP TILE LAMP?

Author:


The lamp is designed with sufficient heat dissipation, low surface cover temperature, safety and good protection. Description of main components of LED strip tile lamp: 1. LED light source (light emitting diode)

The lamp is designed with sufficient heat dissipation, low surface cover temperature, safety and good protection.

Description of main components of LED strip tile lamp:

1. LED light source (light emitting diode)

(1) The luminous angle is 120 degrees, and the front median brightness of red, green and blue light is: Red: 650mcd green: 1500mcd blue: 400mcd, which is more than twice the brightness of the same product, so as to achieve the effect of using less power to convert more light energy* Finally, the whole project will be more energy-saving.

(2) Since we use the full-color smd5050 led with a 120 degree angle as the light source, and this led has a good light distribution, our products can ensure that there will be no dark area and no color deviation when viewed from any angle

(3) The circuit protection measures are designed to add zener diodes inside each led to play the role of electrostatic protection.

(4) LED photoelectric parameters: product par numder forward voltage VF (V) luminous intensity IV (MCD) main wavelength λ D (nm) reverse current IR (UA) visual angle powe r angle (DEG)

Red (R) 1.8-2.4500-700620-63010120

Green (g) 3.0-3.81300-1500515-52510120

Blue (b) 3.0-3.8350-400465-47510120

3. The driver (IC) is a constant current driver IC imported from Taiwan, with low power consumption, long life, stable quality and stable output current to supply LED lamps.

4. PCB (printed circuit board) all aluminum based copper platinum gold-plated plate has low water absorption and excellent moisture-proof performance. It is characterized by good flexibility, not easy to break, and not easy to deform at high and low temperatures

5. Toughened glass: transparent or frosted ultra white toughened glass is adopted, with strong weather resistance, high light transmittance, UV (ultraviolet) resistance for more than 2 years, no color change, impact resistance and high and low temperature resistance, which are greatly superior to domestic products. The thickness is greater than 8-15mm to ensure the resistance strength.

 

6. The special gold-plated data waterproof connector is also very particular about the design of the waterproof connector because the data signal has very high waterproof requirements; Well designed spiral locking waterproof structure, easy to operate and reliable performance. The waterproof gasket of the connector is made of high elastic weather resistant silica gel, which has the characteristics of long-lasting high elasticity and anti-aging. The metal plug-in terminal is made of high-quality copper parts with gold plating on the surface, which has strong anti-oxidation ability and ensures firm contact and excellent electrical conductivity. Special antioxidant is added to the waterproof joint to improve the moisture-proof and waterproof performance again.

7. Full sealing and waterproof: the internal light board adopts the transparent electronic organic silicone full sealing and glue filling process, so that the electronic components and lamps on the light board are not in contact with the air, so that the components are not easy to be corroded and the waterproof performance is more reliable.

 

Advantages LED strip tile lamp waterproof driving power supply, can be directly buried in the ground, convenient wiring and simple maintenance

 

LED strip floor tile lamp is a kind of very high-quality floor tile. It not only has the function of traditional floor tiles to decorate the ground, but also can emit light, set off the atmosphere, and also play the role of protecting the ground.